Fired Heat Exchangers
Selas Fluid's T-Thermal fired heat exchangers are manufactured to meet specific project requirements, offering standard and custom designs. With hundreds of fired heat exchangers delivered, we have experience with a wide variety of applications. Our engineers determine the optimum size heat exchanger for our clients' applications, and we deliver a packaged unit - ready for service after process piping and utility connections are made.
Fired Heat Exchangers - The Technology
Low Btu fired heat exchanger | Fuel-fired heat exchangers heat a fluid without contact between hot combustion gases and the fluid being heated. The units are capable of raising temperatures of gas, liquid, air and steam to 1800o F (980o) and pressure up to 5000 psig (350 Kg/cm2). Single unit heat transfer duties run up to 50MM Btu/hr (15MW). |
Fired Heat Exchangers - Advantages
- Soot-free combustion with oil, gas, or alternative fuels
- High thermal efficiency - low excess air. Flue-gas recycling and combustion air preheating are options designed to lower fuel costs.
- Low pressure drop. Process fluid passes parallel, multiple tubes, saving on horsepower.
- Wide operating range - our units provide high process flow and temperature turndowns; warm idles at zero flow
- Fast startup and rapid response. The limited use of refractory reduces thermal mass and maintenance.
- Quiet forced draft operation
- Uniform heating prevents hot spots
- Flexible tube coils accommodate thermal growth
- The compact flame from HV or LV Vortex high-intensity swirl burners prevents tube impingement
- Sulfur corrosion is limited via low excess air
- Minimal maintenance
|
Fired heat exchanger installation |
Fired Heat Exchangers - Order materials
, No.
>> Order
Fired Heat Exchangers - Contact